At the intersection of 11th Ave, and 15th St S it looks like you attached a footpath to the boundary of the campus. This added a node to the border, which counts as changing it. In the parking lot, I see you added a small section of sidewalk disconnected from anything else, here it is usually better to connect that across the parking lot as that is where you would cross, even if it's not marked as such. As for not seeing the changes yet they are in there right away, but it can take a bit of time sometimes to get them rendered. It depends on how busy the server is at the time. In addition to that your browser chaches the tiles, so you might just need to refresh them, sometimes you need to do <shift>-F5 in order to flush the cach as well.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/58458155

This changesset has a few things that look off to me.
The land around the church on the left is tagged as a meadow. If you are going to tag the area like that you should use landuse=religious. The same for the one on the right. Also the tag building=yes doesn't mean there is a building in this area it means this area is the outline of a building.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/58426880

A few things on this changeset,

Around the school, you tagged all the sidewalks as footway=sidewalk. I know it's a bit counter-intuitive but footway=sidewalk should only be used when the footpath follows a road.

In the park you tagged a playground as leasure=park, but it's not really a park in a park is it? It looks like it should be tagged with leasiure=playground.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/58426774

Hey, Gritzy,

This changeset has two areas edited that are very far away from each other, this makes it harder to tell what was done in the changeset.

The area of water you added up in huntertown looks like it's just a drainage feature, and not filled with water. Perhaps this has cganged since the imagery was taken, but it looks like you probably should have drawn a line, and used tags such as waterway=
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/58426599

This point only has a name and a website tagged on it. I looked at the website but it wasn't really clear to me what MyPlay Studios does. If you didn't know what to use as tags, I might be able to help if you can give me a description of what this location is.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/57974242

Is the speed limit actually 10 MPH for Greenwood Ave, or do you just think it should be 20 MPH?
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/57974151

You added "Press Seal Corporation" as being in the 46806 zipcode, and this seems out of place. Can you confirm that that is right?

Bparnin, Thank you for added this bank to the map. I see you are new here, so I want you to know it looks good. I see your boulding outline is a little skewed, to fix this there is a function in the editor that will let you make an area "square". This will make all the corners of the building be nice 90 degree angles. All you need to do is right click on the outline, and you will get a menu, choose the icon that looks like a square. That will make you boulding look a lot better.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/56761598

In this changeset, you added an area tagged place=neighbourhood. This is good, but you gave it a name that only applies to you, a name tag needs to be the actual name of something. If this is actually a neighborhood here, then it should be tagged with the right name. Also the outline could use some work as well. if the neighborhood doesn't have a distinct boundary it can be added as a node in the center of it. If any of this doesn't make sense, or you aren't sure how to fix this you can respond to this comment and I'll try to help.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/56761239

Are you sure that this is where a marathon is located? I know there is a gas station up a block, but I'm not super familiar with this part of town, so I don't know what brand it is.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/56761153

By the way, you have tagged this node it looks like this is a house you used to live in. The tagging you used is not appropriate for a house. Houses should generally not have a name tag, and a house is very much not an industrial location. A better way to map this would be to trace the outline of the house and use tags that actually describe the location.

Some tags that would probably be right might include:

building=house
addr:housenumber=***
addr:street=*********
addr:zip=*****

And of course, change the star symbols with appropriate values.

Anothger thing I see is that you re-used the same changeset message on a couple different changesets, it helps other mappers know what you have done when you use a new descriptive comment each time.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/56761021

Hey, Luke_fabina You added St. John's here as a point, but it was already on the map. It's not good to duplicate information like that.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/56760808

cbcb77, I see you added the neighborhood names in this changeset, which is great, but you added them as place=hamlet. They really should be tagged as place=neighbourhood. You can actually also draw them as an area around the whole neighborhood and I'll usually add the landuse=residential to that same area. You might have seen some other neighborhoods tagged as place=hamlet, those come from the tiger import, and are tagged incorrectly. They just haven't been fixed yet.

Your edit created a line with no tags from Three rivers MI, to Dayton OH. I'm assuming this is a mistake.

The way you have the intersection of Langsdon Pass and Delray Drive mapped makes it apear as if the whole road curves around in a strange way. I've come across these sorta Cul-De-Sac things before, and I've mapped them as the roads intersecting at a 90 degree angle, and then on the node were they intersect tagging the node as highway=turning_circle. I think mapping in this manner would work better.
---

Published using OSMCha: https://osmcha.mapbox.com/changesets/56133586

I noticed that you placed the entire address of the school under the addr:postcode tag. but then when I went to take a closer look at it, I noticed you said the source for your data wa Google. I Google really where you sourced your information from?

I noticed all of these new houses suddenly showed up on the map, which is cool because the map needs a lot added around town. I'm just wondering is there a reason you didn't any footpath-road crossings in your changeset?

It seems as if the location of this node is wrong. When I look at the bing imagery it is in an open lot, that I remember seeing in the news was being developed as a brewery, and not a loans office. I also want to say your description tag seems to read like it is an advertisement, and that's not how the tag is supposed to be used. To quote the wiki page on the tag: "Never use description=* to add advertising messages."

These paths look like they should most likely be tagged with highway=footway. Also they are probably not named, in which case the name= tag can just be left blank.

In this changeset you added a building outline around all of Jefferson Pointe. This is an outdoor mall, and is actually multiple buildings.