Hello. Thanks for mapping.
Please map buildings not as multipolygons. Just as single building.
Multipolygons are used to map courtyards within (large) buildings.
Best regards

Hello. Thanks for mapping.
a few remarks.
Buildings should be mapped as building=yes. nothing else.

A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mappings

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
C: Collecting adjacent buildings and mapped is as 1 building.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157429144

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multistory buildings are often mapped
On the imagery, you see both the roof and a sidewall (sometimes 2)
The imagery is taken under a certain degree, what shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
A remark about the way high rise or multi-story buildings are often mapped
On the imagery, you see both the roof and a sidewall (with multiple floors)
The imagery is taken under a certain degree and shows you the height of a building.
Don't map both the roof and the sidewalls as 1 building.
Draw just the rooflines as a building and move it to the building's footprint.
See this clip.
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Best regards and keep mapping

Hello. Please check this out.
Mapping of high buildings
https://drive.google.com/file/d/1V5-bADsYiffCD9bo6l64YOdTvmKqMGry/view?usp=sharing

Hello. Thanks for mapping.
The instructions are to map buildings and roads. Please focus to that.
You mapped land use objects and introduced many errors by doing that. Please just map buildings and highways.
Don't connect nodes of objects to other objects. These are errors which have to be solved,
Best regards and keep mapping

Hi again.
Due to the fact that most buildings are poor mapped, most of your mappings will be removed and need to be mapped according to the mapping guidelines.
Sorry that we have to do this.
Best regards and improve your mapping skills please.

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Issues found on your mappings

A: Inaccurate mapping.
C: Collecting adjacent buildings and mapped is as 1 building.

D: Connecting Nodes to other features.

E: Buildings not squared.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157256792

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Issues found on your mappings

A: Inaccurate mapping.
B: Overlapping buildings.

C: Collecting adjacent buildings and mapped is as 1 building.
D: Connecting Nodes to other features.
E: Buildings not squared.
G: Included the shadow of the building.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
E: Buildings not always squared.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157251235

-------------------------------------------------------------
Please check how to map tall buildings
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157244558

Thank you for mapping. You have correctly identified the location of most objects and mapped. However, don't cluster buildings, especially where they span several compounds/yareds

Reminder: Please be sure to square all rectangular buildings with the Q key
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157329816

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
Issues found on your mappings
E: Buildings not squared.
G: Included the shadow of the building.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157223703

Hello. Thanks for mapping.
First: Please solve the issues shown by the issue triangle before you upload your mappings.
2nd. In rural areas, you tagged traces of a road as sidewalk/footway. These are to be used in dense urban areas as to be use by pedestrians only,
read the highway wiki please.
Use path (as narrow as max 2 mtr)
unclassified highway,
or service road. access to a company or residense.
Best regards

Thank you for mapping. You have correctly identified the location of most objects and mapped.
1 buildings is mapped incorrect. it is bigger than you mapped it.
Best regards
Reminder: Please be sure to square all rectangular buildings with the Q key
Reviewed by a validator at random or as requested.
FYI. Please view this video about common new mappers mistakes.
https://www.youtube.com/watch?v=Xs5wX592E1o&t=2s
https://www.youtube.com/watch?v=ltn1VOiq5_0
In this document, you will find some hints and tricks which might help to expand your mapping skills.
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit
Best regards and keep mapping.
---
#REVIEWED_GOOD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/157295262