Hello. Thanks for mapping on this project.
Unfortunately, you used the BING imagery instead of ESRI. (See the instructions !)
Many mapped buildings do not match their ground plan on ESRI and need to be adjusted.
Best regards and keep mapping

Hello. Thanks for mapping.
Unfortunately, you used the BING imagery instead of ESRI. (See the instructions !)

Many mapped buildings do not match their ground plan on ESRI and need to be adjusted.

Best regards

Hello again.
Please do not add a layer to a building. (to hide an error?)
Layers are mostly used on river/road crossings, where a road gets a tag layer=1 where it is a bridge.
Best regards

About tagging of walls.
Just tag walls as barrier=wall
Don't add a tag area=yes to it.
Best regards

Some mapping hints

Buildings can be very close to each other, but in most cases do not actually touch each other - Try to map buildings close to each other without letting them connect or share nodes. Zooming some more can help you. If you made a mistake, you can also disconnect features:
In iD: select the feature and press 'D'. This "disconnects" nodes. Press now 'M' and move your selected feature.
In JOSM: selecting the feature and press ‘G’. This "un-glues" connected nodes, and you are now able to move the feature you want.

Most buildings are rectangular, so make buildings rectangular even if a shadow, tree or roof pitch make it appear otherwise.
Best regards and keep mapping

Hello. Thanks for mapping
Please tag paths just as highway=yes instead of addr:street= footpath.
Best regards

Hello.
Thanks for mapping.
You marked this as a hamlet.
Why? No proof of any buildings here, nor human activity (traces of paths etc.)
I remove this mapping.
Best regards

Some mapping hints

Buildings can be very close to each other, but in most cases do not actually touch each other - Try to map buildings close to each other without letting them connect or share nodes. Zooming some more can help you. If you made a mistake, you can also disconnect features:
In JOSM: selecting the feature and press ‘G’. This "un-glues" connected nodes, and you are now able to move the feature you want.

Most buildings are rectangular, so make buildings rectangular even if a shadow, tree or roof pitch make it appear otherwise.
Best regards

Hello. Check this webpage to see what had to be adjusted.
https://overpass-api.de/achavi/?changeset=165755682
Best regards

We welcome you as a new mapper.
Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
We cannot expect from a new mapper that he/she delivers high-quality mappings from the start, so we offer some guidance.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------

A: Inaccurate mapping.

C: Collecting adjacent buildings and mapped it as 1 building.
E: Buildings not squared.
G: Included the shadow of the building.
H: Included a yard of clearing.

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/165028159

Hello. Thanks for mapping.
Please do not connect nodes of buildings to each other.
Buildings should be separated from each other. On the imagery, it is not clear if they share walls.
Best regards

Hi. Thanks for mapping.
Please use the custom project imagery instead of Esri

This task ought to be mapped with the customs imagery as background.

About mapping of high buildings
Check here how high buildings ought to be mapped.

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Best regards and keep mapping

About mapping of high buildings
Check here how high buildings ought to be mapped.

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Best regards and keep mapping

Thanks for your contribution to this project.
This changeset is reviewed by a Global Validator to check that the tasks have been mapped in accordance with the quality standards of HOTOSM.
Please pay attention to the next summarized issues. (see attached document with examples for more info)
-------------------------------------------------------------
A: Inaccurate mapping. (mappings don't fit to the footprint.
C: Collecting adjacent buildings and mapped it as 1 building.

G: Included the shadow of the building.

H: Included a yard of clearing.
High building(s) incorrect mapped. See par 20 chapter About Buildings

Explanation can be found in this document what might be helpful to strengthen your mapping skills
https://docs.google.com/document/d/1Swwz-ZwM3_YOstqstsmCg1-lNAPbnMLpi1Al-h-2UOQ/edit

Best regards and keep mapping!
Frans S
---
#REVIEWED_BAD #OSMCHA
Published using OSMCha: https://osmcha.org/changesets/164620634

Hello. Thanks for mapping on this project
About mapping of high buildings
Check here how high buildings ought to be mapped.

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping
About mapping of high buildings
Check here how high buildings ought to be mapped.

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping
About mapping of high buildings
Check here how high buildings ought to be mapped.

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Best regards and keep mapping

Hello. Thanks for mapping.
About mapping of high buildings
Check here how high buildings ought to be mapped.

https://docs.google.com/document/d/1z7uDwYm4oNmlexHIhJxGCjPpNhCQAgRia5aEJr_4MwM/edit?usp=sharing

Best regards and keep mapping