I added the parking area and the beach, and a grass area for playing.
Hopefully it will all get rendered.

Question:
The yellow metal reflective poles which usually go around the parking area just at the start of each foot path. .. these can be removed with a lock and key for park staff to drive over it. How do we tag this?

Also, the metal bar that gets put up at night, to prevent cars from going into the parking lot. .. this one is usually left in the 'open' position. How do we tag this?

Beaches and Tides:
on the yahoo imagery, it shows the beach at eithor high or low tide, depending on the time of day the photo was taken. .. so when were out there at low tide... with the GPS right at the water spot... is this where we draw it? .. or is it at mid-tide.
In some places.. this makes a big difference.

Beaches and parks: .. In many cases.. the beach is actually part of the park.. as the park technically extends out in the water for a certain unknown distance (unless there is a boye out there) my guess would be that proper tagging procedure would be to draw the whole park outline, then draw the beach within the park.

Thats all for now :)
Happy Trails ...
P.S. Great to learn that 'TrailRunner' for the iPod uses OSM :)

Hi, sorry for the advertising here..
But check this out.
www.BikeMap.net uses openstreetmap as one of the maps available to choose from.
YouTube video (in German) http://www.youtube.com/watch?v=LpWctNV4yXs

It uses elements from all the other GPS collecting sites that i found before, and incorporates most of the thinks which are the best from each.

I am sharing this.. because this is EXACTLY what im looking for, and can see how users can now... (as soon as they want to) see where openstreetmap needs improvement, and post their GPX tracks here and fix it. ... but using this awesome routing site to share it.
That's soo cool.

Once i get into it a little, i probably have a few sugestions. But on 1st glance... WOW... it's awsome :)

(we can give ourselves a pat on the back, as together we can make OSM the most widely used map... and the most useful map, better than all other maps :)

Go OpenStreetMap :)

Cheers,
Sam

It looks like all 3 maps to a great job of mapping the area...
I noticed that Mapnik got the Bastion Street Bridge right. cool.
and osmarender got the International Hostel in there right. Cool.
and the Cycle map got the Bike shop in there right. Cool.

Fortunately over the next few months, i'll be learning how to configure my own rendering, when i use the SVG file. (I think its a matter of including some lines of code, to get more things added) So when they show up in book form, it would be nice to have it the 'most right' as possible.

So i think my example is pritty good to show what shows up on each map, to perhaps remind some people that the OSM database can contain TONNES of info.. but it's doesnt all need to be rendered. .... so it just depends on who will be using the map. :)

P.S. does anyone happen to know if someone has already started a planet sized map of just the SRTM topo data? ... IMG files just like the ones Computerteddy has? .. so it's 1 degree x 1 degree tiles, done to the standard zoom levels.
Im planning on starting over on the West coast of Vancouver Island, and working my way across... but would be nice if someone else has already done the autoscript for it. Thanks.

I finally had the time to decipher my hand drawn treasure map from the scratches of me feather pen, and so now all my marking are posted, and should be rendered soon. :) It looks like part of it already has.. so that's cool.

I look forward to going back to the island on my next trip to further map it, and perhaps map some of the neighboring island park.

... but there's always more work to-do. .. (even if someone decided to beet me to it), there is lots of work to be done.

Happy mapping,

An idea for ya.
I went on to Google News.. did a search for 'OpenStreetMap' then down at the bottom it gives you options. You can subscribe to the RSS Feed of it and add it to your Google Reader, and also add a iGoogle Gadget. This way, you will always be up-to-date on where and when OpenStreetMap is making the news :)
... But hopefully where will be a way for wiki.openstreetmap.org to be able to show a news feed :)
...

So at least for me, this helps in keeping me motivated to keep on mapping, and passing the hurdles(mostly technical) so then the map book can be made :) Its great to see whats being accomplished so far.

Cheers,
Happy Mapping

So in Nanaimo, i started using the highway=pedestrian tag on areas where it is designated as pedestrian... no bikes, no rolerblades, to scateboards.
... I figure that its a good idea to draw in these, where you have a cement sidewalk.. and its obvious when looking at it in real life that its not for bicycles.
..
When the way is paved flat (with no cement cut blocks) then its not Assumed that its only for bikes or only for foot.
Usually when it is marked as a bicycle.. then it becomes a cycleway.. and pedestrians are asked to take the 'sidewalk'. ...

And so for dirt paths where it's not clear.. i like the new JOSM feature where you can indicate it as hiking .. and it shows different hiking levels.

So to me.... IMO... i will be using highway=pedestrian in 2 cases. 1 where i show a sidewalk next to the road (other roads which dont have anything, its assumed that there is no sidewalk. .. and where its a waterfront boardwalk where its obvious that its pedestrian only.

Hopefully im on the same line of thinking.

Thanks in Advance,
P.S. its not rendered yet, so you'll have to go into editing mode to see it.

This is great little island, a residential island with the Pirate theme.
All the roads are marked with Pirate names
Pirate Lane, Silvers Tier, Pirates Place, Spyglass Lookout, Captain Morgans Blvd, and best of all... Smugglers park :)

A wonderful treasure to find on a day when i was thinking about Biking the bike trails of Nanaimo, but decided not to as it was raining.. and i didnt want to hear the screeching of the wet break pads against the wheels. ... (im a good cyclist.. but multitasking in the rain... it's a good idea. .. gotta stop each time you make a waypoint and notes anyway.

About this treasure... if you ever go there.. even on an island which people didnt adversise togo to as the next island is another ferry ride away which is a provincial park with lots of trails... this one has Spyglass Lookout .. a dead end road where at the end you have a great view of the city against the contrast forground of this natural mini-beach at low tide & marsh area at high tide. .. Just taking a moment to listen to the wildlife. then listen to the background noisy big city.

A great day of mapping. :)

It'll show up soon... just gotta decipher my notes. (you'll see the GPS tracks anyway)

Now with this new GPS, it's much easier. .. i now can see the waypoints i put in.

Here's what i do... maybe you do too..

Using cardstock que-cards (a bunch of 50) with a clip. ...and a pen. I mark down the point #, and then the description, (as much as i need to remember it)
For those lines roads or trails, i mark down 2 points ie. ( #5-6 footpath) that means, from point #5 and along my tracks to point #6 is a footpath.
... and then for areas, i put (#7,8,9,10 amenity=parking )

This way, it's rather quick.. so then when i get to a spot where i have wi-fi, and can upload my tracks and points.. i 1st load them all to OSM website. then i open up JOSM, and open the track file (direct from the device with USB) and then zoom in to the area that i want to play with. Download the latest so far, and add in what i need to, and upload the changes.

After that, i jump onto here and write in the user diary a little something about what i did.

So when im marking something, and want to see exactly how it "should (recommended)" be marked, i just zoom around to the closest spot where it exists already. Maybe like 75% of the time; point, lines, areas already have been done somewhere close. ... making it easy. .. and so, if im not sure, i go ahead and message the person who drew in those points,lines, areas so to keep them up- to-date. ... but more frequently, i just look up on the Wiki Map Features page.. or zoom out to another country (that i have been to) and find something similar.

Cheers,
Sam

Yup, so cool. So for those Canadians out there who know of Mountain Equipment Co-op, well thats where i got my GPS from. What was cool is that they have a guarentee of the products. I bought my old one. The eTrex Legend Cx there a year and a half ago, and returned it because the rubber came loose, and would no longer let me export waypoints.. just the tracks. So i got a refund which was enough to pay for this new GPS.
...
I guess that now covers for my lost GPS last year when i lost all my tracks from Vancouver Island. :) ... So none-the-less, i recommend getting your GPS Device from Mountain Equipment Co-op. May be a little more $, but the guarentee is there.

And so i was deciding on the eTrex Legend HCx or this one.. the main difference is the durability. Because i plan on doing TONNES of mapping, and making tourist maps and local area maps for parks and such, having the stronger more powerful one is worth it. ... maybe the Legend is Great for Biking, and everything else. .. I just figured 'cause i'll be using it more than the average user, it's worth it.

P.S. This isn't meant to be promotions... However, i guess it is :) ... but it's useful info for everyone to know. .. in case your deciding on getting a new GPS. :)

I started from my last 2 visits to Tofino, BC with the GPS tracks.
Unfortunatly my GPS doesnt like t store waypoints (it's been through a lot, and has been tossed 'a many a times.) -hopefully real soon, i'll get a new GPS.

Anyway, Tofino, BC is where the Pacifac Rim National Park is. There is a cool bike trail from the far edge of the park (visitors center) that goes into town. and from the Main Visitors center (intersection of hwy 4... as far as you can go west, you can go south onto another paved bike trail right into Ucluelet, BC

The next time i go up there, i should have a new GPS and be able to put points down, and mark things as a result.
It's listed as a orange line, but should be red. .. as its a road with a solid/dashed center line, and a white line for the shoulder. ... just was hard to do, as there is a big gap between this, and Port Alberni, BC. ... If anyone is driving along up there.... hopefully more tracks will show up.

I think i'll make a wiki page for this. As it's a personal goal to fully complete the town of Tofino, BC (it's a small town)

Hi,
I got the good news that Wikiloc.com is now available as a folder layer on Google Earth. .. On the outset it might not sound like good news.
.. however, what that means is that it's 1 more step closer to having google maps and Google earth show OpenStreetMap.org as a layer.

Here's what we know so far:
Google Maps, has publically announced that they use Wikipedia as a layer option so then all the mapped wikipedia entries will show. (it shows up 1st on searches)
Wikipedia is part of Creative Commons. ... and follows the CC-SA values :)

It looks like Google is trying to become more open source, with the launch of Google chrome, and the sucess of igoogle.com making the home page, EXACTLY what people want to see, and freedom of developers to configure code for it.

Perhaps its a stretch? I dont know.

Well, back to the news. WikiLoc.com is a cool site that you can post your route GPS tracks on the site, and will show the verticle profile, as well as show all the photos of the trip. Whats even more wild about it is that on the slippy map that is shown, it gives you all an option to recommend that OpenStreetMap be used as the base slippy map ... instead of Google Maps. ... Perhaps once wikiloc makes the change, and shows OpenStreetMap as an option or the defult option, when it becomes popular. .. this in inturn will help the Opentreetmap community, as more eyes will see the map, and will learn that they too can contribute.

Once WikiLOC gets even bigger, and takes over the lead to become the main source of adventure trails track collecting, Google will then see the merrit in using OpenStreetMap on google earth. ..
So cool.

Anyway, please comment if you will.
(this isn't an add) (comments??)

If google can also learn to play by the rules... we all win :) ... would be wild when google can search out and sort all the Tags, that are in the database. .. not modifying it.. just showing the results on the map when the user types in key words.

… See full entry

Hi,
Doing some more mapping of Tofino,BC

Does anyone know how to tag the description of a point... say amenity=bikeshop
and then name=Buds Bikes
how to tag what gets put in the description box?
I'd like to have the Company Address, and phone number in there, putting as much text as allowed.

Hopefully this is an easy one.
:)
Sam

P.S. is there a list somewhere which shows all the tags which represent all the default icons on the Garmin Legend CX?

following along with the last post
osm.org/user/Circeus/diary/3476
I was looking over the map features wiki page.
It might be a good idea if many others also review what it says and make sure that it's uptodate, as now the more mapping conventions, and things that can be rendered.. are now rendered.

Cheers

http://sites.google.com/site/canadawikimap/Home/WikiMapC.zip
I posted the link on my site (i'll add it to the Wiki project page, but wanted you guys to see it 1st.
It's a full install file for MapSource to see all of Canada... all the OSM Data of course.
For some reason, the Victoria, Vancouver area and southern BC didn't show up, but next update it should.
cloudmade.com has the full IMG file for Canada, so you can download that.

So what's cool about this one, is that i made a program that will grab the latest and greatest OSM, and also the Unofficial Trans Canada Trail. .. (that part is an interm think until the whole trail gets mapped. .. hopefully within the next year it will happen.

Feel free to comment if you have any ideas.. all are welcome :)

'cause of the Copyright thing, when i make the Across Canada Trails coil bound map book, i cant have the TCT file listed as it is.. it ALL needs to be manually put up there on OSM. ... the book will be free and thats the best part :).

Cheers,
Sam

Im almost done mapping mount doug, i still need to put in the trail post markers.
Any idea on how to tag it?
Some of the trails do have names on these posts, and others is a guess. There is physical information maps at various places throughout the park, so i need to add those also.

Im not sure how to extend the park boundary.

Hi all, i just wanted to let you all know that i updated the GPS Map for Canada, and it shows almost all the major cities, along with the Unofficial Trans Canada Trail, and also the unofficial Across Canada Trail (hiking trail).

I found a way to download all the latest map data, so im now just working on collecting all the data, so i can make the full Canada mapset. Should be good.
Feedback is always good (I get like 20 downloads a day) but very little feedback, so i dont know exactly what people are expecting when using the map. ... for now, i just guess.

http://mapcenter2.cgpsmapper.com/mapview.php?id=1882

Each download is more encouragement ;)

Sam Vekemans
Across Canada Trails

I started to add in the main streets.. its a small town, so in the course of my activities tomorrow, ill be walking all around, so it'll be easy to track it.

I'm just walking on one side of the road, then the other side on the way back, so its easy to see where the roads are.

What i'm doing is jumping around from other cities that i know of, and compare on how to properly tag, or to see whats the standard.
There are tonnes of things to be tagging here.

I uploaded some more of my tracks from ireland, not now, but later i will go in there and see if anyone else has been working in the areas i covered.
.. but for now the track are there so it should help.

I figured id write it in here, in case anyone can chime in.

I am working on the outline map, and using xapi to grab the large amount of data. .. as an OSM file, these files are big, however, when i convert them to IMG files. .there smaller. Considerably smaller, in that its possible to have all OSM data for Canada in a complete Canada mapset.
What im doing is creating a set defines tile area, in which the boundaries don't get messed up with too much overlap of data. .. trying to make it so that full city areas are all in the same tile region, and so its only a few road segments which might get duplicated.

Cloudemade: I see that it hasn't yet been organized, as a few downloads for IMG tiles. .. thats probably because of the sheer scale of it.
So when small isolated towns in the north (for example) yet OSM'd then it takes a whole lot of power to get all that data and converted again.

What would be wild is this:

Using Marble Desktop, to be able to grad the area your looking at, and save it as an OSM file. .. or better yet. with a extra couple mouse clicks, to have it automatically run mkgmap program in DOS, as the file just needs to be saved as data.osm, and it automatically gets saved as the same #'d tile. .. so ....
What would be cool would be to have a program where it automatically asks me to save that .img file SaveAs then i would change the name.

Is there an international standard for tile numbering? .. for GeoBase it seems pretty good, as I'm using 72 as the prefix as it corresponds to 'G' 'B' and then 2 3 digit tile areas. .. if the planet is divided into squares from the equator to the poles. .. cant we have a '1' for possitive and a '0' for negative ..
so then when describing the tile, its 10490123 .. meaning positive 049N and negative 123W .... so then we can have 1 degree tiles available all over the planet. with 1 mouse click to grab the osm data and convert it to IMG.

… See full entry

Its so awesome how its so easy to collaborate with others with making this map project happen.

What i found best is that my keeping in touch with those who are fellow mappers in the area and also with those who are mapping country wide, this avoids so much extra work.

Im getting ever so closer to getting the map ready to launch.

Just wanted to say thanks to all random help of everyone here.

Sam
:)