Hello. Thanks for mapping here
Please pay attention to the errors/warnings which show up on the issue triangle of the right hand menu.
Solve these issues if possible before uploading your work

Here you connected the nodes of the roads to nodes of buildings.
Never connect nodes of buildings to nodes of other features. like highways
Let highways never cross buildings as well.
Navigation systems cannot handle these situations

Best regards and keep mapping

Hello
Thanks for mapping here
Just a small remark
You map short pieces of roads. leading off another highway to a dwelling or farm and tagged it as residential.
the tag 'service' suits better here.
See this wiki which is valid here as well.
osm.wiki/Highway_Tag_Africa

The tag residential is to be used in urban areas, like towns and sometimes villages
Best regards and keep mapping

Hello
Thanks for mapping here
Just a small remark
You map short pieces of roads. leading off another highway to a dwelling or farm and tagged it as residential.
the tag 'service' suits better here.
See this wiki which is valid here as well.
osm.wiki/Highway_Tag_Africa

The tag residential is to be used in urban areas, like towns and sometimes villages
Best regards and keep mapping

Hello
Thanks for mapping here
Just a small remark
You map short pieces of roads. leading off another highway to a dwelling or farm and tagged it as residential.
the tag 'service' suits better here.
See this wiki which is valid here as well.
osm.wiki/Highway_Tag_Africa

The tag residential is to be used in urban areas, like towns and sometimes villages
Best regards and keep mapping

Hello Nicole
Thanks for mapping here
Just a small remark
You map short pieces of roads. leading off another highway to a dwelling or farm and tagged it as residential.
the tag 'service' suits better here.
See this wiki which is valid here as well.
osm.wiki/Highway_Tag_Africa

The tag residential is to be used in urban areas, like towns and sometimes villages
Best regards and keep mapping

Hello. Thanks for mapping here
A remark.
Please map more accuarate and follow the outlines of the roofs.
Please also square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
A hand drawn building is mostly not correct squared. Therefore use the Q key after calling it a building and the objcect is still selected.
Be aware that this will not work when the deviation to a square corner is to big. Then you have to adjust the building manually . After that you can square it again.

Never let a node of a building connect to other features, like highways, other buildings or residential areas
Map each building individually. do not cluster buildings and call it 1 building

Please pay also attention on the issue triangle on the right-hand menu
It alerts you on warnings and errors.
Please (try to)solve these before uploading your work.

Best regards

Hello. Thanks for mapping here.
You mapped a nearly 10 km road over an existing road and tagged it as reidential
Did you see no warnings on the IDeditor?
I've send you another PM about an issue with hidden features on iDeditor. This is the problem here.
I remove your mapping to get it solved.

Hello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
A hand drawn building is mostly not correct squared. Therefore use the Q key after calling it a building and the objcect is still selected.
Be aware that this will not work when the deviation to a square corner is to big. Then you have to adjust the building manually . After that you can square it again.

Never let a node of a building connect to other features, like highways, other buildings or residential areas
Map each building individually. do not cluster buildings and call it 1 building

Please pay also attention on the issue triangle on the right-hand menu
It alerts you on warnings and errors.
Please (try to)solve these before uploading your work.

Best regardsHello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
A hand drawn building is mostly not correct squared. Therefore use the Q key after calling it a building and the objcect is still selected.
Be aware that this will not work when the deviation to a square corner is to big. Then you have to adjust the building manually . After that you can square it again.

Never let a node of a building connect to other features, like highways, other buildings or residential areas
Map each building individually. do not cluster buildings and call it 1 building

Please pay also attention on the issue triangle on the right-hand menu
It alerts you on warnings and errors.
Please (try to)solve these before uploading your work.

Best regards

Hello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
drawing a good rectangular building by hand is mostly not correct squared. Therefore use the Q key after calling it a building and the object is still selected.
Be aware that this will not work when the deviation to a square corner is to big. Then you have to adjust the building manually . After that you can square it again.

Never let a node of a building connect to other features, like highways, other buildings or residential areas
Map each building individually. do not cluster buildings and call it 1 building

Please pay also attention on the issue triangle on the right-hand menu
It alerts you on warnings and errors.
Please (try to)solve these before uploading your work.

Hello. Thanks for mapping
A request.
Never let a node of a building connect to other features, like highways, other buildings or residential areas
Best regards

Hello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
drawing a good rectangular building by hand is mostly not correct squared. Therefore use the Q key after calling it a building and the objcect is still selected.
Be aware that this will not work when the deviaton to a square corner is to big. Then you have to adjust the building manually . After that you can square it again.

Never let a node of a building connect to other features, like highways or residential area

Best regards

Please pay attention on the issue triangle on the right-hand menu
It alert you on warnings and errors.
Please (try to)solve these before uploading your work.

Hello Jacob
Thanks for mapping here.
A remark
Please refresh your knowledge how to map an tag paths and waterways
Here you changed a previous mapped and tagged path into a weird tagging as 'waterway= path"
It is one or the other, but not both.
When you take a look there is a stream as well as a path a bit further on. so please tag them properly in future mappings
Best regards and keep mapping

Hello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
On this place you just mapped 1 building
Why not map them all (appr 7) ? you are anyhow on that spot?

Never let a node of a building connect to other features, like highways or residential area

Best regards and keep mapping

Hello
Thanks for mapping on this project
Please connect pieces of highways to each other so that they make a network.
Best regards and keep mapping

Hello
Thanks for mapping here
Please review your knowledge how to map and tag highways
You tagged a road which leads to farms as a tertiary highway. This tag is to be used for roads connecting villages with towns and have a through going function.
Here the tag unclassified was more suitable.
In the rural areas like here tagging residential roads is also not good.
See this document about tagging of highways.
It says for Africa, but here you can use the same taggings
osm.wiki/Highway_Tag_Africa

Best regards and keep mapping

Seba Gagliardi
Hello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.

Never let a node of a building connect to other features, like highways or residential area

Best regards

Hello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
Best regards

Hello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
Please map each building separate. Do not include more buildings in 1 mapping
Best regards

Hello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
You mapped 28 buildings here of which 10 not properly squared.
Best regards

Hello. Thanks for mapping here
A remark.
Please square all buildings (rectangular) with the Q key in the editor
Most buildings are good rectangular and the mappings should reflect that.
I've send you a PM with more information
Best regards