Hello Lavanya
Thanks for mapping here,
Please square all rectangular buildings with the Q key of the iDeditor. A remark here. When your corners are not close enough to the 90 degrees angle the Issue triangle on the right hand menu don't react so try to map more precise and close to the 90 degrees corners
See this picture (example) Review own work in iDeditor.jpg
Did you have seen these pages ?
https://learnosm.org/en/hot-tips/
Best regards and success with future mappings

Hello. Thanks for mapping here
A remark. You mapped here a lot of traces as track and service road.
In rural areas like this with narrow hardly visible traces of roads, Paths are more appropriate. Service roads should be used in a logical manner. Mostly leading off a higher classified highway. Not as a extension of a track or path
Best regards

Hello Shreya
A short remark
Please map buildings as building=yes.
This is standard at HOTOSM for all buildings.
Best regards

Hello Sam.
Please pay attention on the issues, brought up by the Issue triangle in the righthand menu. You did not solve them before uploading.
Meandering features with green beneath them are mostly waterways. Often dry in dry season

Hello. Thanks for mapping here.
Just 1 point what took my attention.
you have mapped highways and added a tag layer=+1. It suggest that there is a layer beneath it ( like a bridge crossing a river)
Layers are only uses where there is a crossing with rivers, under a roof of a service station where a service road is drawn through the roof, (the roof will than be mapped additional :Layer+1
Best regards

Helllo Sam
Thanks for mapping
Please don't use the tag footpath in these regions. Use highway=path. ( footpaths belongs in residential areas in parks or between buildings. Here, people, cyclists,motorcyclists, horses, oxes etc
Best regards

Hello, Thanks for mapping.
A remark. Landuse features, like farmland are not requested to map
You introduce so many warnings which has to be solved
Please stick to buildings and highways
Also repair the issues which comes up in the Issue triangle in the righthand menu
Best regards

Hello,
Thanks for mapping here.
A remark
you changed the tag of the thoroughgoing highway from unclassified to residential
Please do not tag these long highways as residential. residential tags should be used in towns, villages etc.
Best regards

Hello,
Thanks for mapping here.
A remark
you changed the tag of the thoroughgoing highway from unclassified to residential
Please do not tag these long highways as residential. residential tags should be used in towns, villages etc.
Best regards

Hello Tesp
Thanks for mapping here /
You collect several buildings together and call it 1 building. Please map each building separate>
Best regards

Hello. Thanks for mapping here
A request
Please map buildings separate ( 1 by1) and don't collect them as 1 building.
Please square also your buildings with the Q key in IDeditor
Best regards

Hello Daniel
Thanks for mapping here
Please map more accurate. Your mappings looks very odd.Most buildings are strict rectangular.
Please square your buildings with the Q key in ID editor.
Also, do not collect multiple buildings together and call it 1 building
Best regards and keep mapping

Hallo
een opmerking.
Graag de gebouwen vierkant maken met de Q toest in ID editor.
Let ook op de waarschuwingen in de driehoek in het menu aan de rechterkant en los de fouten op voordat je je werk upload.
vr groeten
Frans

Hello.
I review work of mappers and comment on that when necessary.
Your mappings are not that accurate as we might expect. Please be more accurate and square the buildings you map,
You also connect nodes of paths to buildings. These are errors and should be avoided/repaired.
Best regards

please take a look here
https://www.youtube.com/watch?v=E1YJV6I_rhY&list=PLb9506_-6FMHZ3nwn9heri3xjQKrSq1hN&index=8&t=0s
Squaring of buildings is mentioned on 1.20 minute
please take the time to review this as well
https://learnosm.org/en/beginner/
best regards

Hello. Thanks for mappinghere
A request.
Please square all the rectangular buildings with the Q key in ID editor and try not to map a building oversized.
Best regards

Hello
Thanks for mapping here
You mapped a waterway,
The correct tag is waterway= stream.
nothing more. no tag name=stream.
you also mapped some small lakes and tagged them totally wrong. Mapping of waterways is not in the scope of this project, so no need to map them
Best regards

Hello
Please square the buildings you map with the Q key in ID editor
Check the wiki about tagging highways for a good understanding which road how to tag
Best regards

Hello. Thanks for mapping here,
A few remarks,
You forgot to square a lot of buildings.,
Please square all buildings with the Q key in IDeditor
Not all buildings have been mapped either,
You add tag layer=1 to some buildings. Why?
This tag is used at bridges to show the river is a nivo lower than the street, of at a service station that the roof Layer+1 is above the under laying service road
Please pay also attention on the issues reported by the Issue triangle at the righthand menu. Please solve the issues before uploading your work.
Best regards
btw This task will be invalidated

Hello.
A remark here.
Please square all rectangular buildings you map with the IDeditor Q key,
You did not square a single building
A building can be recognized by the shadow it gives. No or a very tiny shadow means the object is very low (little wall) or no object at all ( piece of farmland)
Please correct these issues